Welcome to our latest article, in which we touch on the topic of gluing walls made of aerated concrete or sand-lime brick. These materials are widely used in the construction industry due to their durability and insulating properties.
Aerated concrete and sand-lime brick
Aerated concrete and sand-lime brick are both popular choices for building walls. They have similar properties, but there are also some differences between the two.
Aerated concrete is a lightweight material consisting of cement, sand and water. It contains small air bubbles that provide good insulation properties. Aerated concrete blocks are often used for interior walls.
Sand-lime brick, on the other hand, is a heavier material consisting mainly of lime and sand. It is characterized by its high load-bearing capacity and sound insulation. Sand-lime brick blocks are usually used for load-bearing walls in homes and buildings.
Gluing aerated concrete walls
The process of gluing aerated concrete walls is quite simple, but it requires accuracy and diligence. Here are the steps to follow:
- Preparation: Make sure the surface is clean and flat. Remove any dirt, dust or loose parts.
- Applying primer: Apply a primer to the surface of the wall to improve the adhesion of the adhesive.
- Glue application: Apply a suitable adhesive to the blocks using a trowel. Make sure there is enough glue for a good bond.
- Placing blocks: Place the blocks firmly in place so that they fit snugly together.
- Alignment: Regularly check that the blocks are straight and level during gluing. If necessary, you can make minor corrections before the glue dries.
- Drying: Allow the glued wall to dry for at least 24 hours before continuing with other work.
Gluing sand-lime brick walls
Gluing sand-lime brick walls requires similar steps to aerated concrete, but there are some specific considerations to take into account:
- Preparation: Make sure the surface is clean and flat. Remove any dirt, dust or loose parts.
- Applying primer: Apply a primer to the surface of the wall to improve the adhesion of the adhesive.
- Glue application: Apply a suitable adhesive to the blocks using a trowel. Make sure there is enough glue for a good bond.
- Placing blocks: Place the blocks firmly in place so that they fit snugly together.
- Alignment: Regularly check that the blocks are straight and level during gluing. Sand-lime brick is sensitive to moisture, so make sure that no water gets between the blocks.
- Drying: Allow the glued wall to dry for at least 24 hours before continuing with other work.
Conclusion
Gluing walls made of aerated concrete or sand-lime brick is an important step in the construction process. By applying accuracy and care, you can ensure that your walls are sturdy and durable. Remember to always follow the adhesive manufacturer's instructions for best results. We hope that this article was useful and helped you understand the process of gluing walls made of aerated concrete or sand-lime brick.
