News

How do you finish aerated concrete blocks nicely? Skirtings and edges

by Marco Janssen on Jun 27, 2023

Hoe werk je cellenbeton blokken mooi af? Plinten en randen

Aerated concrete blocks are a commonly used building material due to their light weight, good insulation properties and easy processing. They are often used for building interior walls in residential and commercial buildings. However, finishing aerated concrete blocks is an important aspect to ensure that the walls look neat and fit well with the rest of the interior.

Skirting boards

One way to give a nice finish to aerated concrete blocks is to use skirting boards. Skirting boards are placed at the bottom of the wall and cover the transition between the floor and the wall. They not only serve as a decorative element, but also protect the underside of the wall from damage such as scratches or bumps.

When choosing skirting boards for aerated concrete blocks, it is important to consider the material from which they are made. Aerated concrete can be sensitive to moisture, so it is advisable to choose skirting boards that are water resistant, such as PVC skirting boards. These are easy to clean and resistant to moisture. Wooden baseboards can also be used, but it is important to ensure that they have been properly treated with a moisture-resistant coating.

Installing skirting boards on aerated concrete blocks can be a bit more difficult than on other materials, because the blocks are hollow inside. It is therefore recommended to use special assembly adhesive for aerated concrete. Apply the adhesive to the back of the baseboard and press it firmly against the wall. Make sure the baseboard is level and allow the adhesive to cure properly before proceeding with any other finishing work.

Edges

In addition to skirting boards, you can also use edge finishing to give a nice finish to aerated concrete blocks. Edge trim is placed on the top of the wall and covers the rough edges of the blocks. This gives a neat and finished look to the wall.

There are several options for finishing the edges of aerated concrete blocks. A popular choice is to use stucco or plaster. This can be easily applied using a trowel or trowel. Apply a thin layer of stucco over the rough edges of the blocks and smooth it out. Allow the stucco to dry thoroughly before proceeding with painting or other finishing work.

Another option for finishing edges is the use of metal corner profiles. These are placed on the corners of the wall and cover both the vertical and horizontal edges. Angle profiles are available in different materials, such as aluminum or stainless steel, and can be easily attached using screws or mounting adhesive.

If you want to create a more decorative look, you can also opt for tiles as an edge finish. Tiles can be glued to the top of the wall to create a clean and modern look. Be sure to use a water-resistant tile adhesive and grout to ensure they stay in place.

Conclusion

Finishing aerated concrete blocks with skirting and edging is essential to ensure that the walls look neat and fit well with the rest of the interior. Skirting boards not only protect the bottom of the wall from damage, but also serve as a decorative element. When choosing skirting boards, it is important to consider moisture-resistant materials such as PVC or well-treated wood.

You can use stucco, metal corner profiles or tiles to finish the rough edges of aerated concrete blocks. Stucco can be easily applied using a trowel and gives a smooth and neat appearance. Metal corner profiles cover both the vertical and horizontal edges and can be easily fixed with screws or glue. Tiles can be glued to the top of the wall for a sleek and modern look.

By using skirting boards and edge finishing, you can finish aerated concrete blocks beautifully and ensure a professional look in your interior.