Murfor 50mm (Roll)
Murfor 50mm (Roll) - Application and Benefits
Description: Murfor 50mm, also known as Murfor I50, is a type of reinforcement used in the adhesive joints of walls to strengthen the structure. It consists of a plastic fabric with 7 galvanized steel wires. Murfor I50 is suitable for mortar joints with a thickness between 3 and 12 mm and is particularly suitable for interior walls exposed to a dry environment.
Why use Murfor?
-
Lintels:
- Lintels are used for openings for windows or door frames. Around these openings and at the bearing of the lintels, stresses occur that can cause cracks. By applying 2 layers of Murfor above and below in the adhesive work, it will take up this stress.
-
Floors and Beams:
- Walls that are loaded with beam bearings or where a concrete floor rests on them can show cracks. Applying Murfor in at least three underlying layers prevents cracking in these situations.
-
Partition Walls:
- Partition walls that stand on a floor slab can show cracks due to large deflection of the floor. To prevent cracking, Murfor should be applied in 2 layers, and the wall must not be placed directly on the floor slab. It is recommended to first apply a strip of DPC foil.
-
Expansion Joints:
- By applying Murfor to long walls, the distances between expansion joints can be increased, and in some cases, an expansion joint is not even necessary. However, it is always recommended to consult a structural engineer.
The use of Murfor I50 contributes to a durable and crack-free structure, especially in situations where stresses and cracks occur frequently. Consulting a professional structural engineer is strongly recommended for specific applications.
Number of m1 per roll: 30 meters